Feature:1. Multifunction LCD display, low power consumption, display date, time, engine speed, travel subtotal mileage, ODO total mileage, 0100KM / H acceleration test mode.2. The display items can be arbitrarily set, and the 8 LEDs have a sequential display function, can set language (CN / EN), date, time, unit (BARPSI, KM / HMPH, ), LED (onoff), speed limit alarm, speed calibration, cylinder number (18 ).3. Waterproof screen, 09000rpm tachometer. Direct connection between display and processor for faster information update. Harness connections are more stable and more accurate than Bluetooth connections.4. Display RRM, speed, air/fuel ratio, turbocharge, water temperature, voltage, exhaust temperature, oil pressure, oil temperature, supports recording and replay with an accuracy of up to 0.01 seconds. 0100 kilometer / h measured value.5. Sensors include instrument display, sensor converter, water temperature and oil temperature sensor, booster tube tee, booster tube air filter, booster sensor, oil pressure sensor, exhaust temperature sensor adapter, exhaust temperature sensor, connecting harness, boost tube.Specification:Item Type: Dash Racing DisplayMaterial: PlasticSize: Approx. 186 x 102 x 22mm/7.32 x 4.02 x 0.87in (Length x Width x Thickness)Speed Belt Display: 9000RPM MaximumDisplay Type: DigitalLanguage: Chinese/EnglishSpeed Belt: 9000 MAXWorking Voltage: 10V-16VApplicable Models: All 12V VehiclesParameters:Control Unit Current Consumption: <200MA (When IGN ON) <1MA (When IGN OFF) <5MAOperating Temperature Range: -20-+60 (Humidity Below 80%)Storage Temperature Range: -30-+80 (Humidity Below 80%)Corresponding Speed Pulse: 2, 4, 6, 8 PulsePulse Free: 1,274-16,562 Pulses/KM (Same as Pulse 2-26)Corresponding Cylinder Number: 1, 2, 3, 4, 5, 6, 8 (Cycle)Parameter Display Range:Speed (SP): 0-255KM/HEngine Speed: 0-9000RPMOil Pressure (OIL P.): 0-150PSI or 0-10BARTurbocharger (BOOST P.): -15-45PSI or -1-3BARAir Fuel Ratio (AFR): 20-10:1Oil Temperature (OIL T.): 0-150 or 0-300Water Temperature (WATER T.): 0-150 or 0-300Exhaust Temperature (EXT T.): 0-1300 or 0-2400Voltage: 10-16VClock: 24H clockFrequently Asked Questions:What kind of display screen does this use? Can the backlight color of the display be changed?Answer: DO908 uses a low-power LCD display screen. The backlight is green and cannot be replaced.Can the speed unit be changed? KPH, MPH?Answer: Yes. DO908 multi-function racing car modification table can switch between KPH (units per kilometer per hour) and MPH (units per mile per hour).1. Can the pressure unit be changed?Answer: The DO908 multi-function racing car modification table can be used to switch between BAR/PSI units.2. Can the temperature unit be changed? Celsius, Fahrenheit?Answer: Yes. The DO908 multi-function racing car modification table can be switched between Fahrenheit () and Celsius () units.3. Can DO908 be used on motorcycles?Answer: DO908 is suitable for all 12v vehicles and has life waterproof function, which can be installed and used on motorcycles.4. Is this model equipped with all sensors? What is the sensor thread size? Can the sensor of the original car be connected?Answer: We are equipped with oil temperature sensor, water temperature sensor, oil pressure sensor, turbocharger sensor and exhaust sensor sensor with uniform thread size ZG1/8. Therefore, the original car sensor cannot be connected, and the original car sensor needs to be replaced with our sensor. Otherwise, the thread does not match and cannot be installed.5. What should I do if my vehicle does not have an ECU?Answer: Usually the signal needs to be connected to the sensor, and the speed and vehicle speed need to be connected to the ECU.If the vehicle does not have an ECU, the speed can be connected to the negative electrode of the ignition coil. At this time, a speed adapter (sold separately) needs to be installed, otherwise it is easy to be interfered by the speed. Some customers want to connect the speed signal to the crankshaft sensor, we do not recommend installation. Because the pulse signal of the crankshaft sensor is much higher than the ECU output, the speed signal will be inaccurate.The vehicle speed is connected to a Hall vehicle speed sensor, and then the vehicle speed is calibrated according to the instructions. The vehicle speed sensor can be installed on the front or rear wheels. Other signals are still connected to the sensor and will not be affected.6. How to receive the air-fuel ratio signal? There is no air-fuel ratio sensor inside.Answer: The air-fuel ratio signal is directly connected to the narrow-area oxygen sensor (0-1v) of the original car, so we do not have another air-fuel ratio sensor.7. Why does the vehicle speed keep showing 255 after installing DO908 only?Answer: The vehicle speed keeps showing 255, which is most likely caused by low-speed calibration. Please re-calibrate the vehicle speed according to the instructions. Vehicle speed calibration requires the vehicle to d