描述
Product Specification:
[Product name]: Motorcycle multi-function LCD instrument
Product Model: CS-1089A1
Product Net Weight: 476G
[Product gross weight]: 555G
[Product material]: ABS material
[Input voltage]: DC12V
[Packing size]: 18.8*13.7*8.5CM
[Product line length]: 58CM
[Packing method]: Kraft paper box
[Speedometer]: tire circumference is 1.85 meters, 4 magnets in a circle, liquid crystal display: 36Hz=63KM/H; when there is a speed, the speed light starts to flow;
[Tachometer]: LCD display: 166Hz to 101000r/min
[Undervoltage alarm]: None
Key Function:
A. Short press the button to switch between total (ODO) and subtotal (TRIP).
B. In the total (ODO) interface, press and hold the button for 8 seconds to switch between metric and inch systems. The default is in metric system. After switching, it can be saved even if the power is completely cut off;
C. In the subtotal (TRIP) interface, press and hold the button for 4 seconds to clear the subtotal
D. In the total (ODO) interface, press and hold the button for 4 seconds to release, enter the clock setting, the hour flashes, the second does not flash, short press the button to increase 1, long press the button for 3 seconds to switch to minutes flashing seconds, seconds If the point does not flash, press and hold the button for 3 seconds to save and exit or automatically save and exit without operation for 10 seconds.
E. Oil alarm: When the oil alarm light is on, switch to the total (ODO) interface, press and hold the button for 8 seconds, the oil light will go out, and the next round of counting will begin.
[Clock adjustment]: 12-hour system, cold boot at AM10:00, in the total (ODO) interface, long press the button for 4 seconds to release, enter the clock setting, the hour flashes, the second does not flash, short press the button to increase 1, Press and hold the button for 3 seconds to switch to the minute second flashing, the second point does not flash, and then hold down the button for 3 seconds to save and exit or automatically save and exit without operation for 10 seconds.
[Backlight]: LCD backlight: white; when the high beam is turned on, the backlight brightness is reduced from 100% to 38%
[LCD screen]: 6 o'clock
[Sensor]: sensor, 4 magnets
[4 round head]: gray: 6 gears, 12 negative control, liquid crystal display; green and white: water temperature signal
[Background parameter setting]:
1. Press and hold the button first, then open the electric door lock, 5S enter the back door setting, divided into 6 interfaces
2.
-
Fruugo ID:
129900318-273113262
-
EAN:
1258253768072
产品安全信息
请参阅下面列出的特定于该产品的产品安全信息
以下信息由销售该产品的独立第三方零售商提供。
产品安全标签
安全警告:
Please note that the product is safe under normal use conditions. However, improper use may lead to hazards such as damage, injury or other safety risks. Please read and follow the instructions carefully.This product complies with EU safety standards. However, for your safety, if any abnormality (such as strange smell, overheating, loose parts, etc.) is found during use, please stop using it immediately.In accordance with the EU General Product Safety Regulation, we remind you that this product is only suitable for [specific applicable people / scenarios]. Use in non - specified people / scenarios may bring potential safety hazards.
