Feature:1. This product is professionally used for fast welding of pipes such as PPR/PE/PB.2. Special iron box packaging, special card position design for toolbox, safe packaging and transportation.3. Enlarge and thicken the panel for longlasting temperature storage, the size of the heating panel directly affects the heat storage.4. The heating panel is made of aluminum alloy, which has long life, good heat preservation and strong mechanical properties.5. Thicker and heavier die head, not easy to stick to the tube and heat up quickly.6. Anti-scalding power cord to prevent the panel from accidentally touching the power cord and melting, causing safety hazards.Specification:Item Type: Electric Pipe Welding MachineMaterial: Aluminum alloy, carbon steelPurpose: Professionally used for fast welding of pipes such as PPR/PE/PBWorking Voltage: 220VACHeating Temperature: 0-300Heating Power: 2000WHeating Time: 15minIncluding Die Size: Approx. 75mm / 3in90mm / 3.5in110mm / 4.3inSafety Index: Insulation resistance is not less than 1MLeakage Current: 2MEnvironment Temperature: -20-50Relative Humidity: 45%-95%RHHow to Use: 1. Fix the machine and heat the moldPut the welding machine on the bracket, install the mold on the machine, and fix it tightly with a wrench. The small mold is usually placed in the front and the large mold is placed in the back.2. Turn on the power and start operating the welding machineTurn on the power supply (the power supply must have a leakage protector), fix the corresponding mold on the machine according to the size, and then heat the machine. When the red indicator light is on, means the temperature is gradually increasing. If the green light is on, it means the temperature Heating is being stopped. When the red indicator light lights up again, it means that the pipe welding machine is under control, and now the temperature remains unchanged, and you can start working.3. WeldingCut the plastic pipe vertically with a cutting machine, then put the pipe and pipe fittings into the mold, take the pipe out of the mold when the heating time is reached, and connect the pipe and pipe fittings after the flange is formed..Package List:1 x Hot Melting Machine3 x Die Cover3 x Die Base1 x Bracket1 x Screwdriver1 x Level 1 x Tape Measure2 x Gloves1 x Hex Wrench2 x Screw1 x User Manual 1 x Iron Storage Box (additional 4 fastening screws)