DESCRIPTIONPlease Note:The colour that appears on your PC monitor could vary from the original colour of the item due to the different resolution settings of your PC monitor. However, if you believe that the item received is in wrong colour, please contact us directly.Normally the allowable differences in the size are approximately 0.5-1cm in measurement. Please check the specifications before you place an order.Please test the airbrush tool with clean water before use, make sure the atomization is normal before using with paints. After use, please clean the air brush to avoid clogging. If the airbrush cannot spray water or liquid foundation, you could disassemble the tail of the airbrush and tighten the nut on the back.Double-Action airbrush kit, the spray gun tool allows users to determine the quantity of air and fluid released with simply fingers' moves. Easy to use and control.The airbrush has 0.2mm needle inside and comes with Kit 0.3mm/0.5mm needle; cup capacity: 9cc; working pressure: 15-50 psi; you can use the different needle to make the fine mist that you want. It sprays an entire range of stipple effects from very fine to coarse textures. Meets any of your needs. Need to work with air compressor that is not included.Application: The air brush set has a variety of uses. Suitable for art painting, model painting (car, bicycle, etc.), temporary tattoos, nail, makeup, cake decorating, body painting, and so on.The spray gun made of high quality copper material and comes with stainless steel needles. Exquisite workmanship, easy to operate.TIP: If the airbrush cannot spray water or liquid foundation, you could disassemble the tail of the airbrush and tighten the nut on the back.Specifications:Size: 23.5 cm * 17.5 cm * 5 cmColour: Copper PlatingWeight: 680gMaterial: CopperNozzle Dia: Airbrush on 0.2, parts 0.3 and 0.5Standard Nozzle Dia.: 0.2mmCup Capacity: 9ccWorking Pressure:15-50psiPACKAGE1 x Airbrush;1 x Nozzle Wrench;1 x Eye Dropper;1 x Instruction;1 x 0.3mm nozzle & 0.3mm jet needle;1 x 0.5mm nozzle & 0.5mm jet needle;1 x 0.5mm nozzle cap;1 x Fast joint;1 x Oil/water separator;1 x Air hose