Description AdBlueOBD2 for IVECO adBlue/DEF and NOx Emulator via OBD2 Plug and Drive Ready Device 1.Drive your truck without Diesel Exhaust Fluid 2.ADBlueOBD2 will override ADBlue system instantly, it will stop the usage of adBlue liquid and disable Nox sensors.3.Without any power loss of the engine or any warnings on the dashboard and in diagnostic systemAdblueOBD2 Emulator for IVECO Trucks Plug and Drive Ready Device by OBD2Top 5 Reasons to Get AdblueOBD2 Emulator for IVECO Trucks:1. ADBlueOBD2 is very easy to install. Just Plug it into OBD2 connector of truck or bus and remove the fuses mentioned.2. ADBlueOBD2 will override ADBlue system instantly, it will stop the usage of adBlue liquid and disable Nox sensors.3. Without any power loss of the engine or any warnings on the dashboard and in diagnostic system.4. ADBlueOBD2 does not damage the engine and not cause any negative effects to the truck factory setting.5. ADBlueOBD2 does not change any of the settings permanently. To turn back to the trucks original settings, just unplug adBlueOBD2 from OBD2 connector.AdblueOBD2 Emulator for IVECO TrucksadBlueOBD2 is a PlugDrive Ready device to mulate working adBlue systems and NOx sensors on trucks, which equipped with EURO 4/5/6 catalytic converter systems, even with damaged adBlue SCR system.dBlueOBD2 is easy to install.Installation and Calibration for IVECO Trucks:1. Pull the Key out from the ignition.2. Remove the following Fuses (For IVECO) Terminal - 5 Terminal - 153. Plug adBlueOBD2 into OBD2 connector4. Turn on the ignition and check the level of adBlue, if it shows 50% or 70%.5. If any fault light appears on dashboard, delete via service scanner.Legal NoticeAdBlue/DEF (Diesel Exhaust Fluid) is used to reduce NOx emissions in vehicles. We recommend you to use adBlue/DEF fuel. You can use this device, if you are unable to find a station to fuel up your adBlue/DEF tank.Package including:1pc x adBlueOBD2 Emulator Box Interface1pc x User Manuel English