["brand new and high quality\nFeatures:\nWhen you usually use your joy-con, your grip won'for t catch the joy-con, easy to run out of, but this buckle can solve your problem.\nHow to use:\nTip 1: be careful with the orange flat wire between the top and bottom of the joy con box. then you need to open the joy con for case carefully. be careful with the spring when you remove the original buckle.\nTip 2: the left and right locking buckle are different. be careful not to reverse them. when you remove the original buckle, there is a little bit of iron. you can use the tweezers to pull it out.\n12 in 1 Buckle Lock for Joycon Set only,other accessories demo in the picture is not included.\n\nSpecification:\nMaterial: Metal\nScrewdriver Length: app.12.8cm/5.04in\nColor: As the pictures shown\nQuantity: 1 Set\n\nNote:\nNo retail package.\nPlease allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid.\nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Contents:\n1 Set x 12 in 1 Buckle Lock for Joycon"]