Metal Car Dent Repair Tools Dent Puller Auto Body Dents Suction Cup T-puller + 18 spacers Features: It is made of metal for strong strength and long durability. A necessary component for dent repair, direct replacement for the broken one. Easy installation, the thread size is M10 for better application. Specification: Material: Metal Color:As the picture show Type: M10 Size: As the picture show Package Included:T-puller + 18 spacers How to use this paintless dent repair kits : 1.Clean the dent with a clean wet cloth 2.Mount the glue stick into the glue gun, pull the trigger to let the glue stick enter into the glue gun, connect the power source and preheat for 5 minutes 3.Use a proper drawing gasket. Large dent requires a large drawing gasket. (Note: The larger thedrawing gasket is, the larger the drawing force is) 4. Pull the trigger and apply the drawing gasket with extruded glue (The 4 holes of gasket should be applied with hot melt glue) 5. Fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres (Let the glue cool for about 8 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter) 6. Align the T-shaped repairer and press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent 7. Check with a Line board. If dent still exists, knock it slightly with a flattening hammer or pen 8. Clean the repaired place with a clean wet cloth When shopping, please pay attention to the size and dimensions of the product to ensure that it meets your needs. In the title and , we have provided detailed information about the product, including its features and specifications We want you to be completely satisfied with your purchase, so if you have any questions or concerns, please don''''t hesitate to contact us. We are here to help and will do our best to assist you. Thank you for choosing our product. We hope you enjoy it