Color:green<br> Material:CCL<br> Housing and wire connectors are waterproof design, good sealing, suitable for harsh environments<br> Look beautiful, , anti-jamming performance<br> Ultra- high-precision op amp circuit, high accuracy, good stability<br> The power supply has reverse polarity protection, surge protection, overcurrent protection<br> Suitable for weighing, pull pressure, torque, and other strain sensor.<br> Working voltage: 12VDC- 24VDC<br> Sensor Sensitivity: 2.0MV / V<br> Excitation output: Output excitation voltage 5V (E +).<br> Output signal: 0-10V<br> Operating temperature range: -20 - 80<br> Operating Humidity: 10% RH-90% RH (non-condensing)<br> Accuracy: 0.2% F.S<br> Precision is 0.05% F.S<br> DIP switch is appropriated for OFF, VO output 0-5V, when to the ON, VO output 0-10V, when DIP switch and No. 2 are appropriated for OFF.<br> 1. Zero adjustment<br> 1: voltage regulation, first the system is unloaded, the regulated voltage zero potentiometer (Vzero) to adjust the zero point. Measured with a multimeter voltage output terminal VO, let indication as close to zero indication.<br> 2: The current adjustment, first the system is unloaded, the current zero adjustment potentiometer (Izero), with a multimeter block measuring the current output of the current IO, try to let it close to 4mA.<br> The re-examination<br> The system is unloaded, the measured zero output; load a certain weight values, measured output voltage is expected magnification. If you do not match, adjust again.<br> Package Contents:1 x 0-10V Load Cell Sensor Transmitter<br> Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.