LCD Screen for Lenovo Tab M10 HD (2nd Gen) TB-X306 TB-X306F with Digitizer Full Assembly (Black) Before Installation Notes Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components within the device. Ensure you wear eye protection and use caution to avoid injury from glass splinters. Tips 2: Simulate testing Screen replacement is a very fragile product. We strongly suggest testing before installation. Please simulate testing by disassembling the device, connecting the motherboard, LCD or screen, o cable, and new replacement, then powering on to complete the test. If the test is successful, proceed with full installation. If there is no display, contact the seller immediately. Do not force installation if the screen does not work. No responsibility will be accepted after the screen has been installed. Tips 3: Do not over-bend the cable Ensure the LCD cable is not bent beyond 90 degrees. Excessive bending may result in a black display. About the Product 1. Replacement LCD screen and touch screen digitizer assembly for Lenovo Tab M10 HD (2nd Gen) TB-X306 TB-X306F 2. Replace your broken or non-functional screen with a new one 3. Restore your device to a like-new appearance 4. Designed for precise fit and full functionality 5. Each unit is tested and confirmed in good condition before shipment 6. Professional installation is highly recommended. No responsibility will be accepted after installation