Features: SDK08 test fixture: This product can clamp chip pins with a pitch greater than 0.3MM. Clamping of small pitch chip pins. Method: Push out the clip opening with the same size as the single pin of the chip, and gently shake it while pushing forward. Simple operation: do not pull down the clamp after use. The correct operation should be to push out the fixture and then gently remove it from the chip pins. The repair method of chip pin not tightly clamped: Use tweezers to adjust the front end of the clamp so that the angle is close to about 90 degrees. This product is a set of 10 pins; for a variety of packaged chips (including TSOP- / MSOP- / SSOP- / TSSOP- / SOIC / SOP- pin clip and other ultra-small chips). Whether memory or applicable MCU microcontroller. Specifications: Material:ABS Size:Approx.16cm/6.29inches Note: 1.Please allow 1-2cm errors due to manual measurement, make sure that you do not mind before you order. 2.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thanks for your understandings. Package includes: 10 pcs/set SDK08 Test Clip