Easy Assembly - terminate in field in minutes without special tools   Wire Connection: Stranded wire AWG 27/7 to 22/7, wire diameter from 0.46 to 0.76 mm   Wire Connection: Solid wire AWG 26/1 to 22/1, wire diameter from 0.4 to 0.76 mm   Transmission Characteristics: Cat7 per IS0/IEC 11801 Ed.2.2:2011-06   Complies with class Ea to ISO/EIC 11801 Ed.2.2.2011-06, DIN EN 50173-1:2011-09 10 Gbit   Color: Gray   Material: plastic, metal   IEEE 802.3an    Supports Power over Ethernet (PoE, PoE plus, and UPoE)    Compatible with Cable Jacket Diameters from 6 to 9.5 mm    Adjustable Strain Relief (6mm to 9.5mm Cable outside diameter)    Load Bar for Faster and Easier Wire Pattern Termination    Operating temperature: -40 ~ +60°C    Relative humidity: 85% (+30°C), Air pressure: 70-106Kpa    Gold Plated Bronze Blade: bronze and gold plating (3-50 µinch}, mating durability not less than 750 cycles    Intermediate resistance: no more than 20 megohm in normal atmospheric pressure (not including bulk resistor)    Insulated resistance: no less than 1,000 megohm in normal atmospheric pressure    1,000 VDC (700 VAC)    Retention strength: 7.7kg between jack and plug   Package Contents:   10pcs * Cat7 connector   Only the above package content, other products are not included.   Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.