Features:12 LED lightsSimulation car lightSimple and easy to useFar flashing, super brightImproved design of circuit board, HOSI power savingHeadlight white, blue taillight, brake light red, turn light yellowSuitable for 1/10 RC carsSpecifications:Name: 12 LED Lighting System KitMaterial: PlasticLED bulb quantity: 12Working Current: 100mAInput voltage: 4.8V - 6.0VLights color: White, red, yellow, blueConnection method: CH1 - Servo CH2 - Speed controller CH3 - ReceiverSuitable for: 1/10 RC carsLED cable length: about 300mmCircuit board size: 53 * 33 * 15mmLights Description:Headlights: 4 white LED lightsConnect the lighting system to the CH3 on receiver: the transmitter can independently control a group of lights, another group of lights are on when the car speed up; Not connect to the CH3 on receiver: one group of lights are always on, another group of lights are on when the car speed up.Turn lights: 4 yellow LED lightsWith the remote control change the direction, the lights will synchronous flashing.Taillights: 2 blue LED lights, 2 red LED lightsThe blue lights are always on. When the car speed up or brake, blue lights will go out. Only when brake, the red lights on.Installation Method:CH2 Transmitter:Connect the plug of servo and ESC to the CH1 and CH2 on lighting system, and then connect the CH1 and CH2 to receiver.CH3 Transmitter:Connect the plug of servo and ESC to the CH1 and CH2 on lighting system, and then connect the CH1, CH2 and CH3 to receiver.Package information:Package size: 16 * 7 * 4cm / 6.3 * 2.8 * 1.6inPackage weight: 60g / 2.1ozPolybag packagePackage list: 1 * 12 LED Lighting System Kit