Working Voltage: AC/DC 12V-36V (AC and DC compatible; wide voltage range: 12V, 14V, 16V, 18V, 24V, 28V, 36V) Working Current: 48mA Quiescent Current: 16mA Max Load: 10A Relay (optimal performance under 5A / 60W) Color: White Material: ABS Function: Receiver with manual button control and wired external button (remote not included) Connect the normally open terminal to the external button pin (U--S--D--GND) to enable motor forward and reverse cycle operation Default power-off state: If power is interrupted and restored, the unit remains off until manually turned on Output mode: Momentary or Latched, selectable via jumper on receiver Ships default in Latched mode; to switch to Momentary, adjust jumper on receiver (do not use Toggle mode) Momentary setting: Jumper on pins 1 & 2 Latched setting: Jumper on pins 3 & 4 Momentary operation: - Press "Up" button: motor runs forward; release to stop - Press "Down" button: motor runs reverse; release to stop Latched operation: - Press "Up" button: motor runs forward; press "Stop" to halt - Press "Down" button: motor runs reverse; press "Stop" to halt If limit switches are not used, UP, DOWN, and COM are pre-connected; remove the link if using limit switches When set to Latched output, a 0.5-second delay between forward and reverse is enabled as a protective feature Package Contents: 1 x Wireless Remote Controller (2 CR2016 button batteries not included) 1 x Receiving Controller Note: Only the items listed above are included; other accessories are not included Note: Lighting effects and display differences may cause slight color variations between image and actual product. Measurement tolerance: +/- 1-3 cm