Specification:Brand newInput Voltage: DC10-14VWorking Voltage: DC12VOutput Current: 10ARated load: 10A 250V AC / 10A 125V AC; 10A 30V DC / 10A 28V DCStandby Current: 5MARF Frequency: 433MHZRF Working mode: Super heterodyne receiverReceiver Sensitivity: >90dBmRemote Control Distance: >100 meter(In open environment)Decoding Way: MCU Software decodingCan store the number of remote control: 50Support remote control type: Fixed code, learning codeChannel: 1CHWiring Method: Fixed wiring terminalOutput: Normally open/Common/Normally closedFine workmanship and good performance.Stable and reliable.Durable in use. Working/Output Way:1. Jog/Non-Latched: Press one button is Working /ON. Loosen your finger on the same button is Stop/OFF. One channel switch need one buttons remote control.2. Self -lock/Self-Latched: Press one button for one time is working/ON. Press the same button again is stop/OFF. One channel switch need one buttons remote control.3. Inter-lock /Latched: Press one button is working/ON, press another button is stop/OFF. One channel switch need 2 buttons remote control.4. Delay: Press remote control relay pull-in, release the remote control and begin timekeeping, after 5s, 10s, 15s will automatically close the relay. Usage:1. Press the learning code and the indicator flash, then loosen your finger, press any button of the remote control the indicator flash 2 times and off. It means that you learn it successfully.2. It can learn more than 12 PCS 2262 or 1527 chip with the different code wireless 433MHz remote control.3. Remove/Clean: press the learning button about 8 seconds, the indicator turn on to off, it means the information that you keep have been removed successfully. Package included:1 x Wireless Relay Switch Note:Please allow 1-3mm errors due to manual measurement.Item color displayed in photos may be showing slightly different on your computer monitor since monitors are not calibrated same