Feature: 1. What you will get: You will receive 1pair car window curtain, 2pcs aluminum rail, 2pcs ABS plastic rail, 2pcs strap and 1pack small accessories. You can easily install curtains with these accessories. 2.For front car window: Curtain is about 50 x 47cm/19.69 x 18.5inch(L x W), suitable for front car window. It is universal and you can install it on most cars. 3. Plastic and aluminum slide rails: ABS plastic rails are durable, not easy to deform, and are suitable for the lower edge of a straight window. The aluminum rail is suitable for the upper edge of the curved window, and the rail has a special rubber strip to prevent the deformation of the chute, so the rail can be bent with confidence. 4. Sun protection: This window is an excellent car interior accessory. It is made of polyester fabric, which is opaque, can effectively protect against sun and heat, and provides a more comfortable interior environment. It is also ideal for protecting privacy. 5. Easy to install: Install the slide rail on the window first, then pass the curtain through the upper and lower rails of the car window, and seal the entrance and exit of the rail. Affix the curtain tie hooks in a position that does not interfere with the window's lift. Specifications: Color: Beige Material: Polyester Type: Opaque Applicability: Universal How to use: Orbital Size: About 50 x 47cm/19.69 x 18.5inch(L x W) Package Includes: 1pair x Car window curtain 2pcs x Aluminum rail 2pcs x ABS plastic rail 2pcs x Strap 1pack x Small accessories Note: 1. Due to the light and screen difference, the item's color may be slightly different from the pictures. 2. Please allow 0.5-2 cm differences due to manual measurement. How to install: 1. Clean the place to be installed. 2. Install the plastic track of the lower frame first. There is a hole at one end of the rail, please confirm the position of the hole. Note that the side with the track opening is fixed to the closed side after the curtain is retracted 3. Then press back and forth a few times to ensure that it has been glued, and the lower rail is installed. 4. The opening position of the aluminum rail is the same as that of the lower rail (towards the closed side of the curtain). Gently press down the track along the surface of the window frame to make the shape of the track consistent with the shape of the window frame (please do not peel off the release paper first, once the track is glued and taken off, it will easily deform and become unusable. ). 5. After the track is pasted, it is recommended to keep the curtain for 24 hours before installing the curtain to ensure the stickiness is stable. 6. Insert the curtain slide balls one by one from the opening of the track in order, slide to the side where the curtain is opened, slide the last slide ball to the direction where the curtain is closed, and then take out the track plug in the accessory bag . Note: Be sure to leave a sliding ball on the right side of the track opening. This way, when the curtains are opened, they don't all run to the front. 7. The following is also to install the sliding balls into the track chute one by one. After leaving a sliding ball on the right side of the opening, plug the track plug. 8. When installing the curtain strap hook, please confirm the installation position first, so as not to affect the use of the windows and doors. There is double-sided tape on the back of the strap hook. When fixing, tear off the peeling paper and think hard for a few times to fix it. 9. Finally, install the window on one side by passing the curtain straps through, and install the other sides in the same way. Welcome to our store , hope you have a pleasant shopping experience