1. Bending sensor: The degree of bending can be translated into a change in resistance value. The more the sensor is bent, the higher the resistance. This sensor can be used in applications such as energy-sensing gloves. 2. Bending direction: The side with the text is the inner side when bending. Avoid bending the pin portion (the part not designed to bend) during use to prevent damage. Model: Flex Sensor 2.2 inch Technical Specifications: - Resistance in straight position: 25K ohms - Resistance tolerance: 30% - Resistance change when bent: 60K110K ohms - Rated power: 0.5 Watt - Maximum power: 1 Watt - Bending life: Greater than 1 million cycles - Operating temperature: -35C to +80C - Interface type: 2-pin metal pins (0.1 inch pitch) Torque sensor for electronic gloves. When the sensor bends, the resistance changes, allowing bend detection. - Resistance in non-bent state: 9,000 ohms - Resistance at 90-degree bend: 14,000 ohms - Resistance at 180-degree bend: 22,000 ohms Principle: Resistive sensing Application: Motion and bend detection Type: Flexible sensor Output: Analog Dimensions: 7.5 x 1 x 1 cm Material: ABS Color: Yellow Package Contents: 1 x Flex Sensor Note: Light reflection and display differences may cause slight variations between the item color in the image and the actual product. Measurement error allowance: 13 cm.