1. How To The Normal Size Of The Acoustic Foam: 1. After opening the Vacuum package, place the Acoustic Foam in a ventilated place for 12-24 hours; 2. Or the foam in water for 1 , wring it dry, then air dry or use a dry.2. The principle of the soundproofing foam is that the sound inside the sponge is repeatedly reflected back and forth, thereby achieving the effect of noise reduction and sound absorption.the acoustic panels not only have effective sound absorption characteristics, also will not cause any harm to body.The high quality material studio foam can keep sound insulation function permanently. In terms of cleaning, you just need to vacuum and dust occasionally.3. High-Density -Retardant Material: The sound absorbing foam panels is made of -retardant and environmentally friendly materials, which can be used safely. The absorption spectrum is wide and over 500 HZ.High-Density material,which is higher than the industry standard of 30%. At the same time, it can also sound quality: by absorbing harmful sounds, reducing fluctuations, reverberation, and vibrating , Useful sounds are clearer.4. Installation : It is recommended to stick the tape to the four corners and the center of the back of the acoustic foam panels, and then to the wall. Or you can purchase spray glue to install the soundproofing foam according to your needs.5. For professional acoustic control Acoustic Foam Each comes uncompressed and in condition With professional acoustic control, sound suppression, acoustic processing, noise reduction, the acoustic foam is to reduce the waves, reverb and flutter in small and medium-sized rooms.Acoustic panels is suitable for sound recording studio, room, home theater, KTV, and all kinds of public .colour:Black+grayMaterial:Polyurethanesize:30 x 30 x 2.5cmPackage Contents:12 x Black Soundproofing Foam12 x Gray Soundproofing FoamOnly the above package content, other are not included.Note: Light and different displays may cause the color of the item in the a little different from the real thing. The measurement allowed is +/- 1-3cm.