This DCDC buck converter module provides a fixed 7.5V output from higher DC input voltages. It accepts an input range of 10V36V and delivers up to 1A of output current. The module is designed to supply a stable 7.5V rail for low voltage electronics from common 12V, 24V, or other supplies. For example, it can convert a 24V supply to 7.5V for compatible devices. Key benefits Stable 7.5V output across the input range to power devices reliably. Wide input range 10V36V allows use with multiple power sources, including 24V systems. Module form factor enables easy integration into projects, control panels, or prototyping builds. Buck regulation provides efficiency advantages over linear regulators when stepping down from higher voltages, reducing heat generation for moderate loads. Simple wiring and mounting suitable for embedded projects and compact enclosures. Key attributes Functionality: DCDC buck converter with fixed output of 7.5V and maximum current of 1A from an input range of 10V36V. Compatibility: Designed to power 7.5V devices from 12V, 24V, or other supplies within the specified input range. Size and form: Modulebased converter. Exact dimensions are not provided here; refer to the product datasheet for mounting and footprint details. Material: Material not specified in this description; check the product specification for housing and PCB materials. Performance: Fixed 7.5V output at 1A maximum; input range 10V36V. Applications Automotive and industrial control panels needing a dedicated 7.5V rail for logic boards, sensors, or peripheral modules from 1236V sources. Robotics and automation systems that run on battery or power rails in the 1224V range and require a 7.5V supply for controllers or actuators. Prototyping and compact equipment where a compact 7.5V supply from a higher voltage source is beneficial for microcontrollers, sensors, or small electronics. Usage notes Connect input to a DC source within 10V36V and load to the 7.5V output. Do not exceed 1A continuous current. Ensure correct polarity. This is a module designed for integration into projects; plan appropriate mounting and thermal considerations as needed for your enclosure.