Features 1、Optimized with high receiving sensitivity (RSSI) and strong signal‑to‑noise ratio (SNR), with powerful anti‑interference technology. 2、Point‑to‑point mode PC connected with 2 Lora modules point‑to‑point support two‑way data transmission and reception at the same frequency. 3、Address and encryption functions can be enabled, directional communication between modules, safe and reliable, to prevent data leakage. 4、The radio can realize multi‑level relay networking, which is suitable for ultra‑long distance and complex environment networking communication. 5、Strong anti‑interference, transmission distance and penetration ability are several times higher than traditional communication. 6、This function can modify the parameters of the radio remotely, which greatly reduces the cost of installation and debugging and maintenance. Specification Item Type: Wireless Transceiver Module Material: Aluminum alloy Model: RS232/485/422-LORA Working Voltage: DC12-36V Communication Interface: RS232/RS485/RS422 (3 kinds of communication interfaces are not independent of each other and cannot be sent and received at the same time) Baud Rate: Default 9600; check bit and stop bit can be set (up to 115200 can be passed through the host computer) Communication Distance: (open) Modulation Method: Lora (with FSK, OOK, GFSK) Transmission Rate: Lora mode; 0.2-37.5kbps Working Frequency: 410Mhz-525Mhz Data Transmission Mode: Support stream mode and packet mode Streaming Mode: 1 serial port can not send 1 Packet Mode: Wait for the serial port to receive once and then send it wirelessly Maximum Transmit Power: Maximum 20dbm Receiving Sensitivity: -136dbm Working Temperature: -40℃-+85℃ Size: Approx. 60mm / 2.4in 41mm / 1.6in 10mm / 0.4in 5mm / 0.2in 83mm / 3.3in 18mm / 0.7in 4mm / 0.2in 16mm / 0.6in 3mm / 0.1in 7mm / 0.3in 6mm / 0.2in 14mm / 0.6in 25mm / 1in 36mm / 1.4in 1mm / 0.04in 9mm / 0.4in Package List 2 x Wireless Transceiver Module 2 x Antenna