Details: *100% brand new and high quality*Color: Silver, Red(As Pictures Show)* Length: 120mm(Approx.)* Product type: Wire stripper* Material: 45 # precision steel* The surface is chrome-plated. The screws are 304 stainless steel.* Stem: 3/8 "Hex Stem* 3 holes and 5 wires: 4 planes*Tips:1.Clamp the wires with pliers. The wires must be parallel and in a row, and they must be firmly fixed2.The pliers are in close touch with the parallelizerInstruction:Electric:1.Prepare the hand drill and place the liner on the hand drill2.Insert the three wires of the parallel wire separately, fix the back end with a vise, and then adjust the threader and the screw to fix it as much as possible, and fix all three wires. If it is not fixed, it will affect the bonding effect.3.Start the electric drill to start the electric drill and slowly rotate the aligner. During the rotation, you must align the aligner with force in the direction of the vise. After the winding is completed, you can release the positioner and take off the thread.Manual :1.Measure the length of the stripes2.Put a large number of wires in the corresponding holes and fix them with vise3.Press the parallelizer in the direction of the arrow to rotate and parallelPackage Contents:1Set Wire StripperNote: 1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.2. Please allow slight manual measurement deviation for the data.