Soil pH Meter 4-in-1 Soil Tester Moisture Digital Plant Thermometer for Potted Plants Gardens Lawns [4 in 1 Function] This 4-in-1 soil tester measures soil moisture, pH, temperature, and sunlight intensity to help you care for your plants more effectively. [Precise and Durable] Upgraded needle detection technology improves detection speed and accuracy for reliable results. [Large LCD Display with Backlight] The large LCD screen clearly displays readings, and the green backlight allows visibility in low-light conditions. [Wide Application] Suitable for indoor and outdoor use. Ideal for gardens, farms, potted plants, succulents, and lawns. Lightweight and portable design. [Easy to Use and Carry] Compact size makes it convenient to carry and operate. Insert the probe 3–5 inches into the soil and wait 10 seconds for a reading. Remove and wipe clean after each use. Monitor key soil conditions—moisture, pH, temperature, and light—to understand what your plants need to thrive. Features: - Ambient Light: Level 9 - Soil pH: 3.5–9 - Temperature: -9°C to 50°C (16°F to 122°F) - Moisture: Level 5 - Dimensions: 12.5 x 2.3 x 1.7 inches - Increments: 0.5 How to Use: 1. Remove the red cap from the probe and turn on the device. 2. Insert the probe 3–5 inches into the soil. 3. Adjust the probe position until it is securely in place. 4. Wait about 10 seconds to read moisture, light level, and temperature on the display. Slide the switch to pH mode to check soil pH. 5. Remove the probe and wipe it clean after use. Note: Do not submerge the device in liquid. Avoid blocking the light sensor when measuring light levels. If the soil is too dry for an accurate pH reading, water the soil slightly and wait 30 minutes before testing again. Package Includes: 1 x Soil Tester Size: 317 x 57 mm (Color may vary slightly due to monitor settings. Manual measurement allows for 1–2 cm variation.) Color: Yellow + Black