Feature: 1. Multi Purpose: Card envelope scoring board can be used to make gift boxes, envelopes and bows, and can also be used to cut rounded corners. 2. Lightweight Portable: Scrapbook envelope board is light in weight and convenient to carry in a bag. 3. Indentation Pen: Scrapbook envelope board is equipped with a metal round headed indentation pen, which makes scratches smoother and comfortable to hold. 4. Extensible Handle: Envelope scoring board adopts extensible handle, which can expand the scratch range. 5. Enjoy DIY: Envelope scoring board is a multifunctional tool that allows you to enjoy DIY. Specification: Item Type: 4 in 1 Scrapbook Envelope Board Material: Abs, Metal Usage: Used to Make Gift Boxes, Envelopes, Bows,Cut Rounded Corners, Etc. Length:Approx. 35cm / 13.8in Width: Approx. 19cm / 7.5in Instructions for making gift boxes: (use one sheet of paper at a time) 1. Select the size of the gift box and prepare the corresponding paper size. 2. Align the left edge of the paper with the corresponding "START" positioning line. 3. Draw the corresponding HORIZONTAL &VERTICAL and "DIAGONAL" indentation lines with indentation strokes. 4. Press the blue button to cut the chamfer. 5. Turn the paper counterclockwise by 90 degree, put it in, and repeat steps 3 and 4 to scratch all edges to overwhelm the corners. 6. Turn the paper upside down, align the edges of the four sides according to step 2, and put it in. Press the blue button to make a chamfer notch. 7. Put the four corners of the paper into "B" to cut the rounded hooks. 8. Fold along the scratch. 9. Make the scratch line clearer. 10. Fold the diagonal inward. 11. Connect two diagonal hooks respectively. 12. The gift box is finished. Instructions for making envelopes: 1. Select the content stationery size. 2. Prepare envelope paper of corresponding size. 3. Align the left edge of the paper with the scale corresponding to "SCORE". 4. Press the scratch along the HORIZONTAL line with a scratch pen. 5. Press the blue button to cut the chamfer. 6. Rotate the paper by 90 degree, align the pressed scratch line with the panel VERTICAL line and put it in. 7. Press the scratch again along the HORIZONTAL line with a scratch pen. 8. Repeat the above steps 4‑7 to press scratches and cut chamfers on the four sides respectively. 9. Put the four corners of the paper into "A" to round the corners. 10. Fold the envelope along the scratch to make it. Instructions for making bows: 1. Prepare two strips of colored paper with equal width and unequal length. 2. Place the center of the long side of the strip colored paper in the chamfer to overwhelm the corner gap on both sides. 3. Put the four corners of the strip colored paper in "A" and round the corners respectively. 4. Fold the two ends of the strip colored paper inward, stick it and fix it for later use. 5. Put chamfering notches in the center aligned chamfers of the four sides of the short colored paper respectively. 6. After the centers of the two parts are aligned, fix the bow with adhesive tape.. Package List: 1 x 4 in 1 Scrapbook Envelope Board1 x Indentation Pen Note: Please note that the paper should be in accordance with the comparison table, and there should be no error in size.