Selling Point Note 1: Use the vehicle fitment information provided in the listing to confirm compatibility. If you are unsure which item fits your vehicle, please verify with your VIN to confirm before ordering. Note 2: No sensor programming required. The tire pressure sensor is pre-programmed for your specific make, model, and year. Activation is required via scan tool or re-learning process. Simplified relearn procedure: OBDII is required. TPMS installation is recommended to be performed by trained professionals. SPECIFICATION: Replacement Part Numbers: 40700-4CB1B, 407004CB0A, 407004CB1A Battery Life: Approximately 3 years Operating Frequency: 433MHz PACKAGE CONTENT: Standard package includes all necessary components for installation. Comprehensive Vehicle Coverage: Compatible with the following vehicles: - Alpine A110 (from 2017-12 to 2022-06) - Lada Granta (from 2014-03 to 2021-08) - Lada Kalina (from 2013-07 to 2019-10) - Nissan Leaf (from 2017-12 to 2021-12) - Nissan Micra (from 2017-02 to 2023-02) - Nissan NV200 (from 2009-09 to 2020-09) - Nissan Qashqai (from 2016-10 to 2020-09) - Nissan X-Trail (from 2016-10 to 2020-04) - Espace V (from 2015-01 to 2021-03) - Kadjar (from 2015-04 to 2019-06) - Kangoo Z.E. (from 2017-01 to 2019-12) - Koleos (from 2016-08 to 2022-03) - Megane (from 2016-09 to 2024-05) - Megane Van (from 2016-02 to 2023-06) - Scenic (from 2016-09 to 2023-06) - Talisman (from 2015-09 to 2022-09) Installation Procedure: 1. Loosen the tire: Remove the valve cap and core, then deflate the tire. 2. Dismount the tire: Secure the tire on a tire changer and position the valve at 1 o'clock relative to the tire separation head. Use a tire tool to lift the bead onto the mounting head. 3. Remove the sensor: Use a screwdriver to remove the fastening screw and detach the sensor from the valve stem. Loosen the nut and remove the valve. 4. Install sensor and valve: Insert the valve stem through the rim’s valve hole. Tighten the nut to 4.0 Nm using a positioning pin. Attach the sensor body to the rim and secure with the screw. 5. Mount the tire: Position the tire on the rim with the valve aligned 180 degrees from the separation head. Mount the tire onto the rim properly.