Feature:1. Provide a lower loss way, in highpower applications, offers a highefficiency solution, reduce the need for heat dissipation, saving circuit board space.2. The input and output are equivalent to diodes. When the output voltage is detected to be greater than the input, the output will be turned off. The detection value is in the millivolt level, and the response speed is fast.3. Adopt an Nchannel MOSFET to replace a diode to reduce power consumption. Use ultrastrong high current low ESR MOS tube, 300A, 1.5 milliohms.4. It is an ideal choice to replace ordinary highcurrent diodes and solar panels in parallel, and is suitable for charging reverse irrigation protection.5. Manufactured according to the original production specifications, in line with strict quality standards.Specification:Item Type: DiodeMaterial: BrassWorking Voltage: 9-70VWorking Current: Maximum working current 50ACircuit Board Size: Approx. 38 x 54mm/1.5 x 2.1inCopper Foil Thickness: 1.5ozPurpose: Replace ordinary high-current diodes, ideal for parallel connection of solar panels, suitable for charging anti-backflow protectionHow to Use:1. Unscrew the screws before wiring2. According to the signs on the board, positive input and positive output3. Wrap the wire in the middle of the screw gasket and tighten the screw4. Or use clips to directly clamp the copper sheet.Package List:1 x Diode