Description
5A MPPT Solar Panel Controller, DC-DC 6-36V Step-Down CC/CV Charging Module, Dual/Single LED Display Controller
Description
5A MPPT Solar Panel Controller DC-DC 6-36V Step-Down CC/CV Charging Module Dual/Single LED Display Controller
5A MPPT Solar Panel Controller DC-DC 6-36V Step-Down CC/CV Charging Module Dual/Single LED Display Controller
5AMPPT Solar Panel Controller DC-DC 6-36V Step-Down CC/CV Charging Module Dual/Single LED Display Controller
Module Name: 5A Step-Down Constant Voltage Constant Current MPPT
Module Features: Non-isolated step-down module (BUCK)
Input Voltage: 6-36V
Output Voltage:
1.25-32V Continuously Adjustable (Default Output 5V)
MPPT Voltage Setting Range: 6-36V
Output Current Range: 0.05-5A (Default Output Current is 5A) 3A)
Flash output range: 0.01-5A (default flash current is 0.3A). Due to component parameter errors, the current range may vary slightly.
Multi-functional dual display: Input voltage, output voltage, output current, output power
Operating temperature: -40 to +85 degrees Celsius
Operating frequency: 180 kHz
Conversion efficiency: Up to 95% (efficiency is related to input and output voltage, current, and pressure)
Short circuit protection: Yes
Over-temperature protection: (Automatically shuts off output after over-temperature)
Input polarity protection: None (a diode can be connected in series if necessary)
Output reverse ion protection: None. The output must be connected to a battery and a diode in series; otherwise, the module will burn out!
Charging indicator: Red when charging, green when fully charged. The rotating indicator is used to detect the output current. Installation: 4 3mm screws
Connection: IN for input, OUT for output
Module size: 60x31x22mm (excluding instrument)
Note:
Detection module, do not connect the negative output directly to the negative input.
Applications:
1. DIY voltage regulator with constant current function and short-circuit current protection to protect the load.
2. Can power electronic devices.
3. Can monitor the charging status of different batteries.
4. Charger suitable for various batteries, with MPPT function to double the charging current. Constant current power supply prevents battery overcharging and effectively protects the battery.
5. Supports high-performance LEDs.
6. Can be used as a car power supply to power your mobile phone or digital products.
Package list:
1 ST*5AMPPT Solar Panel Controller DC-DC Step-Down CC/CV Charging Module LED Display
-
Fruugo ID:
520591476-1059538914
-
EAN:
8852414513179
Product Safety Information
Please see the product safety information specific to this product outlined below
The following information is provided by the independent third-party retailer selling this product.
Product Safety Labels
Safety Warnings:
Important Safety Instructions
Read Before Use: Please read all instructions and safety warnings before using this product. Failure to follow these guidelines may result in injury, damage, or malfunction.
General Warnings
Intended Use: Use this product only for its intended purpose as described in the user manual.
Supervision Required: This product is not intended for use by children or persons with reduced physical, sensory, or mental capabilities without supervision.
Inspection Before Use: Check for any signs of damage or wear before use. Do not use if damaged.
