This product is a breakout board for Allegro's A4988 DMOS Microstepping Driver with Translator and Overcurrent Protection;This stepper motor driver lets you to operate bipolar stepper motors in full-, half-, quarter-, eighth-, and sixteenth-step modes, with an output drive capacity of up to 35 V and 2 A.The translator is the key to the easy implementation of the A4988.Simply inputting one pulse on the STEP input drives the motor one microstep.There are no phase sequence tables, high frequency control lines, or complex interfaces to program.The A4988 interface is an ideal fit for applications where a complex microprocessor is unavailable or is overburdened.FeaturesSimple step and direction control interfaceFive different step resolutions: full-step, half-step, quarter-step, eighth-step, and sixteenth-stepAdjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor's rated voltage to achieve higher step ratesIntelligent chopping control that automatically selects the correct current decay mode (fast decay or slow decay)Over-temperature thermal shutdown, under-voltage lockout, and crossover-current protectionShort-to-ground and shorted-load protectionWarningConnecting or disconnecting a stepper motor while the driver is powered can destroy the driver.(More generally, rewiring anything while it is powered is asking for trouble.)Size: See the pictureNo retail packagQuantity: 5Pcs (1Set)Note: Due to the difference between different monitors, the picture may not reflect the actual colorof the item. Thank you