ARGB 5v3-pin controller, powered by SATA, does not need the motherboard to support 5V ARGB, you can directly use the power SATA interface to supply power, through the built-in light mode of the controller, you can achieve lighting control for 5v 3-pin ARGB products ARGB controller has dozens of built-in lighting modes, which can realize manual control of lighting effects, such as monochrome, trotting light, rainbow and other modes (note: this controller does not support connecting the motherboard software to control the light synchronization) Simple button design, simple operation and functional use M key: Click to switch to the next lighting mode, and you can cycle to switch the controller's own lighting mode S key: Single click to switch the light conversion speed, there are 8 gears can be switched cyclically, long press the S key for 4 seconds to turn off the light, and then long press for 4 seconds to turn on the light C key: Click to switch to other light colors in the same mode or make the light cycle in reverse, long press the C key for 5 seconds to switch the light brightness, a total of 6 levels of brightness can be cycled