Feature:1. Not Easy to False Welding: Our relay module is well made, not easy to false welding, steady working process.2. Continuous Closure: This 8 channel relay is continuously closed 100000 times, with strong driving capability and stable performance.3. Equipped with Chip: This 8 channel relay is equipped with a mature and stable 8 bit MCU and RS485 level communication chip.4. Optocoupler Input Signal Detection: The 8 channel relay can realize 1 channel optocoupler input signal detection and 1 channel relay output.5. Use Scenario: Our relay module can be used for digital word quantity detection or power control applications.Specification:Item Type: 8 Channel Relay ModuleMaterial: ABSOn board mature and stable 8bit MCU and MAX485 level conversion chipCommunication Protocol: Support standard RTU protocolCommunication Interface: Support RS485 or TTL UART interfaceCommunication Baud Rate: 4800 9600 19200, default 9600bps, support power down saveOptocoupler Input signal range: DC3.3-30V (this input can not be used for relay control)Output Signal: Relay signal, support manual, light off, light off mode, light off Flashing lightDelay base 0.1S, the maximum flash off or flash off time can be set to 0xFFFF x 0.1S equal 65535 x 0.1S equal 6553.5SDevice Address: Range 1-255, default 255, support power down saveOn board 1 way 5V,10A 250V AC 10A 30V DC relay, can be continuously closed 100,000 times, with diode liquid accumulation protection, short response timeOn board relay switch indicatorSupply Voltage: DC7-24V, with input anti reverse connection protection.Package List:1 x 8 Channel Relay Module Note:The 5‑6 bytes of the transmit frame represent data, 0xFF00 means open trunk and 0x0000 means close trunk.