1. AUTOMATIC SHUTDOWN: Converter has a variety of software protection mechanisms, and the protection threshold is adjustable. When the working parameters of the module exceed the protection threshold, the output is automatically shut down 2. DISPLAY CONTENT: LCD voltage regulator can display input or output voltage, output current, output power, output capacity, output time 3. SAFETY PROTECTION: The input end of the power module has prevent reverse connection protection, which will not burn out during reverse connection. The output end is protected against counter current. No need to add counter current diodes when charging 4. MULTIPLE APPLICATIONS: The voltage converter board can be used as a regular or boost module with overcurrent protection Used as a high power LED constant current driver module DIY a solar controller, battery charging 5. TECHNICAL PARAMETERS: boost converter has a small output ripple and can be equipped with a filter. Thick heat sink, integrated and boost Spec: Item Type: DC to DC Boost Converter Material: ABS Input Voltage: 6.0~30V Output Voltage: 0.6~30V Output Current: 0~5.0A Voltage Accuracy: 0.5%+1 word Output Power: 80W Current Accuracy: 0.5%+3 words Voltage Resolution: 0.01V Current Resolution: 0.001A Conversion Efficiency: About 88% Soft Boot: Yes Protection mechanism: Input Prevent Reverse: Yes Output prevent backpouring: Yes Input Undervoltage Protection: 4.7-30V adjustable, 4.7V by default Output Overvoltage Protection: 0-37V adjustable, 37V by default Output Overcurrent Protection: 0-5.2A Adjustable, 5.2A by default Output Overpower Protection: 0-82W adjustable, 82W by default Overtemperature Protection: Yes, 100 by default Timeout Protection: 0-100H adjustable, not enabled by default Overcapacity Protection: 0 to 9999AH adjustable, not enabled by default Super Energy Protection: 0 to 9999WH adjustable, not enabled by