For OnePlus 7 Original AMOLED Material LCD Screen and Digitizer Full Assembly (Black) About the product 1. Replacement LCD screen and touch screen digitizer assembly (AMOLED Material) for OnePlus 7 2. Replace your broken or damaged screen with a new one 3. Restore your device to a like-new appearance 4. Designed for complete fit and full functionality 5. Each unit is tested and inspected before shipment 6. Professional installation is highly recommended. No responsibility is taken after installation Before Installation Notes Tip 1: Test before installation Do not remove any protective film or labels during testing. Handle with care to avoid static electricity. Before beginning any repair, use an ESD (electrostatic discharge) strap to ground yourself to prevent damage to internal components. Wear eye protection and handle glass components carefully to avoid injury from sharp edges. Tip 2: Perform a test fit Screen replacements are delicate. Test the display before final installation. Partially disassemble the phone, connect the motherboard to the new LCD/screen assembly and display cable, power on the device, and verify proper function. If the screen works correctly, proceed with full installation. If the screen does not display, contact support immediately. Do not force installation if the screen is not functioning. No responsibility is taken after installation. Tip 3: Avoid excessive cable bending Do not bend the LCD cable beyond 90 degrees. Excessive bending may result in display failure or black screen.