Name: Electronic Drain Valve Model: 507292 Indicator Lamp: LED indicating power on/off Voltage Range: +/-10% Protection Rating: IP65 Insulation Class: H Maximum Working Pressure: 1.6 MPa Maximum Temperature: 90°C Operating Temperature Range: -40°C to 60°C Maximum Current Consumption: 4 mA Power Supply Voltage: 24–240V AC/DC, 50/60 Hz Discharge Time (ON): 0.5–10 seconds Time Interval (OFF): 0.5–45 minutes Widely used in separators, dryers, gas tanks, drip legs, and other compressed air system components Cleans the compressed air system after installation Note the direction of flow when installing the valve: outlet must not be blocked and should not face direct airflow impact Power supply voltage must match the drain valve voltage requirement: when using DC, connect to terminal "1" When wiring the drain valve, connect brown wire to L (live), blue wire to N (neutral), and yellow-green wire to safety ground (GND) Tighten the long screw on the terminal box securely to prevent water ingress Warning: Ensure the following before installation: Compressed air system is fully depressurized Power supply is disconnected Color: Gold + Black Material: Metal Size: 5 mm Inlet/Outlet Port Size: 1/2 inch Package Contents: 1 x Electronic Drain Valve Note: Light and display differences may cause slight color variation between image and actual item Measurement error allowed: +/- 1–3 cm