Name: Electronic Drain Valve Indicator Lamp: LED indicating on/off Voltage Range: +/-10% Protection Grade: IP65 Insulation: Class H Maximum Working Pressure: 1.6 MPa Maximum Temperature: 90°C Ambient Temperature: -40°C to 60°C Maximum Current Consumption: 4 mA Supply Voltage: 24–240V AC/DC, 50/60 Hz Discharge Time (ON): 0.5–10 seconds Time Interval (OFF): 0.5–45 minutes Widely used in filters, separators, dryers, gas tanks, drip legs, and other compressed air system components Clean the compressed air system before installation Observe flow direction when installing the valve; outlet must not be blocked Ensure supply voltage matches drain valve voltage specification When using DC power, connect positive pole to terminal 1 Factory pre-connected cable: brown wire = live (L), blue wire = neutral (N), yellow-green wire = ground (GND) Tighten the screws on the terminal box securely to prevent water ingress Warning: Before installing the electronic drain valve, ensure that the system is depressurized and the power supply is disconnected Color: Gold + Black Material: Metal Size: Aperture: 5 mm Port Size: 1/2 inch Package Contents: 1 x Electronic Drain Valve Note: Other products are not included Note: Lighting and monitor differences may cause slight color variations between image and actual item Measurement error allowance: +/- 1–3 cm