and High Quality This valve is the replacement of the float ballcock, which can be applied to of high water tanks, pools, water towers of the industry and civil construction, etc. Automatic control, low -complementary water, water full automatic stop Four intakes, volume of water Beautiful appearance, small size, practical, simple installation Without electricity, easy to use, , low failure rate, saving water resources. When the pool or tank water levels , the valve body will sink down and then the forerunner of the control valve will be opened. As the pipe water pressure affects, the seal face of control valve will be opened. Finally the water comes out and Note: This production belongs to the liquid level control valves. When installed, the float must be vertical. if you need to install from the top , a Elbow needed to connect the float valve and the inlet . , the feed should be fixed in horizontal plane and then connect the automatic water level control valve on the water inlet according to the standard. The main water inlet should be lined with the control valves' Normal Diameter. When using, the globe valve should be all open. If two valves are installed in the same pool, the two valves should be in the same horizontal plane. installing, please clean the impurities in the pipes in case of blocking. If the water quality is not good, then the valves need to be maintained properly. If the users find the time of adding water becomes , he can just upload the water inlet and washed Specifications: Type: Outer Material: Nylon color: White Working pressure range: 0.2-10kg Applicable Medium: clean water Applicable Medium temperature: 70 Resistance to high temperaturemedium temperature: 70~120 Outlet Diameter: G1/2 Size: 100.2 x 58 x 50mm/110.2 x 58 x 50mm/87 x 71 x 50mm : 1 Pc Package Contents:1 x Automatic Water Level Control Valve Only the above package content, other are not included. Note: Light and different displays may cause the color of the item in the a little different from the real thing. The measurement allowed error is +/- 1-3cm.