Features 1、Generally used for absorbable surface, such as paper, cloth, wood (no paint) and other materials, the pattern is very clear. 2、When printed on cloth, the color is bright and washable, and also on wood, the color is bright, is a good tool to use with stamp. 3、Different colors to choose, can DIY freely and use it anywhere you want. 4、Safe and environmental protection, non-toxic and harmless, printing is clear and easy to use. 5、The operation is simple, convenient and easy to print the color you want. Specification Condition: 100% Brand New Item Type: Ink Pad Material: Ink + Sponge + Plastic Optional Color: BD-242 Light Blue, BD-252 Sand Yellow, BD-253 Antumn Leaves, BD-254 Chocolate, BD-256 Brick Red, BD-257 Rose Gray, BD-258 Sky Fog, BD-260 Celadon, BD-261 Wine Red, BD-262 Midnight Blue Quantity: 1PCS Weight: Approx. 42g Size: Approx. 9.5x5.52cm/3.74x2.17inch Instructions and notes: 1. Using the ink pad to gently pat on the stamp, color evenly can be stamped, if the color is weak, you can repeat the action. 2. When printing on cloth, first should keep the cloth clean, for fabrics that have not been watered, it is recommended to cover them after washing. After the printing oil drying, ironing for 15 seconds (160℃) to increase the color effect, but depending on the type of fabric, the degree of washable also varies.(color can also be fixed by other heat treatments, such as ovens, irons, hot air guns, etc.) 3. Please note that it is not easy to cover the coarse fiber or cloth with fuzz. If you can test the cover at the edge of the cloth before printing, there is no need to worry. 4. When printing on wood, use a hair dryer to dry thoroughly. 5. This printing pad convex powder is available 6. all paper can also be used, the effect is very beautiful. 7. In order to extend the service life of the printing pad, the printing pad should be stored in a dry place, out of light, close the cover, cover surface is kept at the top. Package List 1 x DIY Stamp Ink Pad