BDM100 is a universal reader/programmer (it does not require our software necessarily) that allows the user to read and program files in the ECU supplied with MPC5xx processor (essential). BDM 100 requires the ECU to be open, "on the bench", as the reading/programming operations are realized by linking a flat cable to specific area the ECU (the tool, on the other side, is linked to the USB port of a computer). BDM 100 allows also to create perfect copies of the whole software of an ECU (after having read the ECU software). The software allows to read and program the WHOLE ECU content of: 29BL802 SSOP eprom file (or ROM memory with maps if eprom physically not present) MPC5xx Processor file Serial Eprom content. Please note that even in the case of the ECU blocking, due to the wrong checksum recalculation, the ECU can always be reprogrammed and then retrieved (if the software has been previously stored). Plug Type: US Plug, it applies to Canada, India, Mexico, Thailand, Taiwan, the , the Philippines and so on. Voltage: AC100-240V Colour:As Shown Material:plastic+metal Package Contents: 1 x BDM 100 Interface 1 x ECU Connecting Cable with 3 Adapters 1 x USB Connecting Cable Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.