Feature 1Intelligent: The system adopts adaptive signal processing and target recognition methods, only alarms moving targets with speeds greater than 20km/h. 2High Accuracy: The system adopts multi channel interference technology to accurately measure the distance, speed and angle of the target, and does not alarm the target outside the alarm area. 3Safety: When monitoring the blind spot, the moving targets in the blind zone, including approaching, following (the same speed as the car), and distant targets are alarmed to improve driving safety. 4Principle: When there is a moving target in the alarm area, the alarm indicator lights up, at this time, if the driver forces the turn signal to turn, the alarm indicator flashes and the alarm horn issues an alarm. 5Practical: Three core functions supported, with blind spot warning, lane change warning, door opening warning, simple installation, no need to connect to the OBD installation system.Item Type:BlindSpotMonitoringSystemMaterial: ABSRadar Frequency: 24ghzMaximum Detection Distance: Approx. 20m/65.62ftDetection Range Accuracy: Approx. 0.1m/0.33ftConventional Alarm Distance: 7-8m/22.97-26.25ftSystem Alarm Accuracy: Approx. 0.1m/0.33ftWaterproof Rating: IP67 waterproofWarning Time: The Minimum Warning Response Time Is 0.75 SecondsWorking Voltage: 12VOperating Frequency: 24ghzSpeed Range: -20m/S~20m/S, 72m/236.22ftWorking Temperature: -45~ 85CAlarm Mode: First Level Alarm, The Yellow Light Is Always On, Second Level Alarm (Turn On The Turn Signal), The Red Light Flashes And The Buzzer Beeps To RemindDifferent Objects Have Different Early Warning DistancesBlind Spot Monitoring 24ghz Radar, The Monitoring Distance Is 20m/65.62ftThe Warning Distances For Trucks, Cars, Electric Vehicles, And Pedestrians Are Different.Truck Warning Distance Is: 0.3-10m/0.98-32.81ftThe Car Warning Distance Is: 0.3-8m/0.98-26.25ftPedestrian Warning Distance Is: 0.3-6m/0.98-19.69ftCore Function 1: BSD blind spot monitoringWarning strategies and trigger conditions1. Warning Area: 10 meters on the left and right rear sides of vehicles in the adjacent lane2. Trigger Condition: Boot start3. Early Warning Strategy: The target enters the blind zone, and the warning light warns(First level warning: yellow light) First level warning state, this carTurn on the turn signal, and the buzzer alarms at the same time. (Level 2 Warning:Flashing red light + beep beep code)Core Function 2: Lane change warningWarning strategies and trigger conditions1. The vehicle is low speed, the target vehicle is high speed, and the relative speed is large2. When the relative collision time between the target car and the vehicle is 5 seconds,Start the LCA function3. The target object with a relative speed of less than 1M/s is filtered.4. The maximum warning distance is 50 meters5. The warning light lights up for the first level alarm, the first level of early warning statusThe lower turn signal is a secondary warning (the buzzer emits drops at the same timeTicking alarm)Core Function 3: EAF door opening warningWarning strategies and trigger conditions1. The first level warning function is similar to LCA, and the vehicle is close to the warning(50m)2. Under the first level alarm state, the car turns the signal and beepsSimultaneous alarm (secondary warning) .wang-edit-text{ font-family:'Arial' !important; } .wang-edit-text table { border-top: 1px solid #000; border-left: 1px solid #000; } .wang-edit-text table td, .wang-edit-text table th { border-bottom: 1px solid #000; border-right: 1px solid #000; padding: 3px 5px; } .wang-edit-text table th { text-align: center; }Package List2 x BSD Radar1 x Buzzer2 x Prompter4 x Bracket8 x Screw Fitting1 x Lamp Harness1 x InstallationAuxiliary Card3 x BSDRadar Harness1 x Instruction Manual