Features: Convenient: The brake spreading tool features a 360-degree ratchet design that makes it simple to get into place and operate from any direction while also preventing hand fatigue from repetitive squeezing. Easy to use: The ratchet is located in the center of the twin piston brake caliper compressor, and the two spreading plates must remain parallel in order to uniformly distribute the force on the caliper piston in the event of caliper breakage or piston dislocation. Labors Saving: Brake repair brake spreading tool adopts 360 degree ratchet design, it is easy to get into place and use from any direction, also your hands will not get fatigued from the constant squeezing. The ratchet is in the centre of the dual piston brake caliper compressor, the two spreading plates keep parallel, make sure to spread the force on the caliper piston evenly, in case of caliper damage or pistons dislocation. Use-friendly: Swing the long lever handle to expand and retract the spreading plates, and the positive and negative regulation is realized by flipping the reversing switch in the ratchet. Because of ratcheting mechanism, both spreading plates need pressure to start the ratchet, please squeeze them for the first few swing until the suitable size to insert into the calipers, then go ahead to swing. Application: This brake caliper press tool suits for disc brake, NOT for drum brake. Also this ratcheting caliper spreader is designed to "push" the piston back, can not twist and compress, which some brakes need. Notice: 1.Actual color may be slightly different from the image due to different light effect 2.Please allow 1-3cm deviation due to manual measurement Description: Material: Carbon steel Weight: 786g Size: As picture show Package List: 1 x Car Brake Caliper Press Tool