Make sure that the nail plate is adequately prepared, completely clean, free of cuticles and slightly made rough with a buffer.Clean the natural nail with Lint Free Pads saturated with pure acetone.Apply a sufficient amount of Antifungal to the entire natural nail.Clean again with Lint Free Pads saturated with pure acetone.Apply a no acid primer - bonder on the entire surface of the natural nail (from the cuticles to the free edge) without touching the area of the cuticles and the lateral folds of the nail.*** The application of the primer is optional Apply a thin layer of the desired Laloo base (base coat or Graphen base in the color we like).Cure under a Led Lamp for 60'' or a UV Lamp for 120''.Apply a first thin layer of the color of your choice.Cure under a Led Lamp for 60'' or a UV Lamp for 120''.Apply a second layer of the color of your choice and make sure to apply it properly in order to give full coverage.Cure under a Led Lamp for 60'' or a UV Lamp for 120''.Apply a layer of Bubble Gel and cure 60'' or a UV Lamp for 120''.Apply a layer of Top Coat or No Wipe Top Coat or No Wipe Matte Top Coat and cure under a Led Lamp for 60'' or a UV Lamp for 120''.*** If you choose a top coat with a sticky surface, you must remove it in the end with Cleaner Ultra Shine Effect by Laloo Cosmetics or a 70 degrees alcoholic lotion without glycerin or oils.*** If you choose a No Wipe Top Coat, you must after the curing process leave the customer's hand to "cool" down for 1-1½ minutes so that the polish gives all its shine. Finally, complete the semi-permanent manicure procedure by applying oils to restore the pH of the nail.