CAPSULE MACHINE CAPSULE SIZE.00# 100-HOLE It is used to fill the powder of empty capsule No. 00# (the capsule can be filled normally if it is slightly deformed). The new semi-automatic precision capsule filling plate is made of Taiwanese cast and molding ABS Jimei, which is more precise than the capsule assembly made of hand drilled and glued acrylic plate on the market; It is more durable and durable, and the design is beautiful, and the product is rounded around it, and the operation is convenient. The color is bright, the strength is good, and the material is thick; Precise size, simple to use, fast and convenient filling, even charging; Imitation mechanical automatic design layout, capsule stacking speed is fast, automatic stacking speed is high; It is the most ideal non-mechanical capsule filling tool in China. Product sets: hat plate, stacking plate, intermediate plate composition. Accessories: Pressure plate, scraper. How to use: 1. Place the stacking plate on the hat plate. 2. Insert the correct amount of capsule caps. 3. Shake the capsule outlet so that it falls up into the hole in the capsule plate. 4. Pour out the excess capsule cap. 5. Remove the retainer plate. 6. Place the words of the middle plate upwards on the board with the nut. 7. Place the tray on the body plate. 8. Pour the correct amount of capsule and shake it so that the capsule hole falls upwards into the capsule plate opening. 9. Pour out the excess capsule and remove the tray from the tray. 10. Pour the powder onto the body plate and scrape back and forth with a scraper. 11. Flip the overlapping cap plate and center plate onto the body plate. 12. Press firmly with both hands to lock the capsule. 13. Then remove the cap plate. 14. Remove the middle plate, during this time the filled capsules are located on the middle plate. 15. Gently pat the middle plate to make the capsule fall out. 16. Fill the container once to finish filling the capsule.