Item Type: CC Debugger <br>Material: ABS + Printed Circuit Board <br>Function: Used for TI low power RF system chip. <br>Working Frequency: 2.405-2.485GHz <br>Wireless Transmission Rate: 250Kbaud <br>Power Consumption: <20mA (receiving); <25mA (transmitting) <br>The Chips that the Programmer Can Program and Simulate are: CC1110, CC1111, CC2430, CC2431, CC2510, CC2511, CC2530, CC2531, CC2533, CC2540, CC2541, CC2543, CC2544, CC2545 <br>The Same Device can be Controlled from for SmartRF Studio. Can Control the Following Transceivers from for SmartRF Studio: CC1120, CC1121, CC1125, CC1175, CC1100, CC1101, CC110L, CC113L, CC115L, CC2500, CC2520 <br>Can Also be Used to Program for PurePath Wireless Devices: CC8520, CC8521, CC8530, CC8531 <br>Working: Can work with 7.51A or higher version of for IAR EW8051.<br>1、CC debugger is a small programmer and debugger for TI low power RF system chips. <br>2、Can also be used to control selected devices of for SmartRF Studio, very convenient. <br>3、Can be used with for IAR Embedded Workbench for 8051 (7.51A or higher) for debugging and for SmartRF Flash Programmer for flash memory programming. <br>4、You can match it with hardware to realize analyser function, and the sniffer board with shell is waterproof and anti static. <br>5、Can program and simulate a variety of chips, including CC1110, CC1111, CC2430, CC2431, CC2510, CC2511, CC2530, etc.Do not place the product in an environment that is too corrosive, humid and high temperature.<p>1 x CC Debugger</p><p>1 x Sniffer Board</p><p>1 x Antenna</p><p>3 x Programming Line</p><p>1 x Adapter Board</p><p>1 x USB Cable</p>