Specification: DC voltage 6V or 60V or 600V or 1000V ± (1 percent and 3) AC voltage 6V or 60V or 600V or 750V ± (1.2 percent and 3) DC current 6V or 60V or 600V or 750V ± (1.2 percent and 3) AC current 60A or 600A or 1000A ± (3.0 percent and 5) Resistance 600Ω or 6kΩ or 60kΩ or 600kΩ or 6MΩ or 60MΩ ± (1.0 percent and 3) Capacitance 10nF or 100nF or 1μF or 10μF or 100μF or 1mF or 10mF ± (4.0 percent and 3), 100mF ± (5.0 percent and 5) Frequency 10Hz or 100Hz or 1kHz or 10kHz or 100kHz or 1MHz or 10MHz ± (1.0 percent and 3) Duty cycle 1 percent - 99 percent ± (1.0 percent and 2) Temperature -40 ° C - 1000 ° C ± (1.0 percent and 3) Number of counts 6000 Ranges selection (automatic or manual) Yes Continuity test Yes, audible and light alarm Diode testing Yes Data storage Yes NCV Yes, audible and visual alarm Backlight Yes Flashlight Yes Low battery indicator Yes Automatic shutdown Yes True RMS Value Yes LPF Yes MAX or MIN Yes V-LoZ Yes Power supply 2x AA battery (included) Weight Approx. 380 g Dimensions 240 x 85 x 40 mm Jaw width 44 mm Security EN61010-1, -2-030 EN61010-2-033, EN61326-1 CAT III 1000V, CATIV 600V EN61010-1, -2-030 EN61010-2-033, EN61326-1 CAT III 1000V, CATIV 600V Habotest HT208D digital clamp meter The HT208D is a practical device with which you can check the value of various parameters, for example, AC and DC voltage and current, resistance, temperature, inrush current and many more. The product provides precise measurement, the results of which are then displayed on the LCD screen. HT208D also has a flashlight that allows comfortable work in dark rooms. Multifunctional device You can use the digital clamp meter in many situations. With it, you can check the value of AC voltage, resistance, capacity, temperature, frequency, NCV, etc. You can also check for continuity and true RMS value. Safe use The device has been designed so that its use is completely safe. You can, for example, detect voltage contactlessly thanks to NCV sensors. The meter jaws, thanks to the maximum width of 40 mm, allow you to conveniently take measurements without damaging the circuit. The flashlight function ensures comfortable and safe work in dark rooms. Additional Features After receiving the electromagnetic signal, the NCV sensor will emit an audible alarm, and if the voltage or current is high, the color of the LCD screen will change to orange. Moreover, the device will turn off automatically to save energy if no operation is performed for 15 minutes.