Incubator Temperature Controller Digital Hatchery Temperature Controller for Incubators Refrigerators 110‑220V Item Type: Incubator Temperature Controller Material: ABS Power Supply Voltage: AC110-230V Power Supply Frequency: 50/60Hz Temperature Measurement Range: -40-110℃ Temperature Measurement Accuracy: 0.3℃ Humidity Measurement Range: 0%-100%RH Humidity Measurement Accuracy: 3% Output Control: Relay Output Output Power: Mximum 10A Installation Hole Size: Approx. 28 x 70mm/1.1 x 2.8in Setup essential Start value <stop value (the program automatically determines that the working mode is heating/humidifying mode) Start value>Stop value (The program automatically determines that the working mode is cooling/dehumidifying mode) Heating/cooling mode setting Setting method: Setting (start temperature): long press the △1 button, the start temperature flashes, and set the start temperature value through the △1▽1 key Setting (stop temperature): long press the ▽1 button to stop the temperature flashing, and set the stop temperature value through the △1▽1 button. Heating use case: Control the water heater, stop heating to 70°C, start heating again when the temperature drops to 45°C, and cycle Step 1: Heating working mode, starting temperature <stop temperature Step 2: Long press the △1 button, the start temperature flashes, and set the start temperature to 45℃ by pressing the △1▽1 button. Step 3: Long press the ▽1 button to stop the temperature flashing, and set the stop temperature to 70℃ by pressing the △1▽1 button, and the setting is complete! If there is no operation for 10 seconds, it will automatically return to the normal display state. You can also press △2▽2 to exit immediately. Refrigeration use cases: Used in the breeding farm, the fan ventilation stops at 25℃, and the temperature rises to 30℃ to start ventilation again Step 1: Cooling mode, start temperature>stop temperature Step 2: Long press the △1 button, the start temperature flashes, and set the start temperature to 30℃ by pressing the △1▽1 button Step 3: Long press the ▽1 button to stop the temperature flashing, and set the stop temperature to 25℃ through the △1▽ button, and the setting is complete! If there is no operation for 10 seconds, it will automatically return to the normal display state. You can also press △2▽2 to exit immediately. Humidification/dehumidification mode setting Setting method: Setting (starting humidity): long press the △2 key, the start humidity value flashes, and set the start humidity value through the △2▽2 key. Setting (stop humidity): Long press the ▽2 key to stop the flashing of the humidity value, and set the stop humidity value through the △2▽2 key. Humidification example: To humidify the supermarket, control the humidifier to 50% RH to start humidifying, and to stop humidifying when humidified to 80% RH. Setting steps: Step 1: Long press the Δ2 key to start the humidity value flashing, and use the △2▽2 key to set the start humidity value to 50%RH Step 2: Long press the ▽2 key to stop the humidity value flashing, and set the stop humidity value to 80%RH through the △2▽2 key, and the setting is complete! Press the key for 10 seconds without operation, it will automatically return to the normal display state, or you can press the △1▽1 key to exit immediately. Dehumidification example: Workshop control exhaust dehumidification system, humidity 75%RH starts dehumidification, humidity 45%RH stops dehumidification Setting steps: Step 1: Long press the △2 key to start the humidity value flashing, and use the △2▽2 key to set the starting humidity value to 75%RH Step 2: Long press the ▽2 key to stop the humidity value flashing, and set the stop humidity value to 45%RH by pressing the △2▽2 key, and the setting is complete! Press the key for 10 seconds without operation, it will automatically return to the normal display state, or you can press the △1▽1 key to exit immediately. Temperature correction Temperature correction: Press the △1▽1 key at the same time for 5 seconds to start the temperature digital flashing, and it will display 00. Set the start temperature correction value through the △1▽1 key. After the setting is completed, press the button for 10 seconds without any operation, and it will automatically return to the normal display state. You can also press the △2▽2 button to exit immediately. Humidity correction Humidity correction: Press the △2▽2 key at the same time for 5 seconds to start the humidity number flashing, display 00, and set the start humidity correction value through the △2▽2 key. After setting, press the button for 10 seconds without any operation, and it will automatically return to the normal display state. You can also press △1▽1 to exit immediately.