One-third of the force can be hand-carved, 3-5 times the speed for carving, without fatigue. Each has five special chisel tips with a small wrench. Cannot be used alone, must be used with power tools, such as hanging grinders. Small grinders, electric drills, flexible shafts, and the rotation speed should be less than 12000. In addition to general woodworking, it can also be used to carve ebony or soft plastic. Features: This electric wood chisel is mainly used for woodworking, furniture carving, antique floor carving, potted plants, toys, figurines, animals, and other carving work. It can save a lot of force than hand-carving and increase the engraving speed without fatigue. The shell is solid. Excellent thermal efficiency, very safe. Each electric chisel has 5 cutters and a small wrench. Powered by electricity, 3-5 times the speed of hand engraving, saving time and energy. You can use it for a long time without fatigue. A high-speed vibration of 25,000 times per minute is generated after the knife head touches the wood, and it is carved with the ultra-high-speed vibration. Specifications: Material: metal and plastic. Product length: about 16 cm. Package includes: 1 x wood carving chisel. 1 tube. 1 wrench. 5 carving blades. Tips: 01 This product can only be used with a machine with a flexible shaft, such as a desktop polishing machine, a hanging mill, an electric drill, an electric grinder, etc. Must be installed on the right side of the mill, otherwise the reverse direction will destroy the flexible shaft. 02. After using for 10 minutes, it should be stopped for 2-3 minutes to prevent the product from overheating, and then use it after the machine has cooled down completely. 03. This product can only engrave the surface of the material. The angle of the lower knife is controlled at a small angle of 15-20 degrees, not too large or even vertical.Welcome to meet