ENCNF2S-N01 NGFF To SATA3 Transfer Card M.2 KEY B-M SSD To 6Gbps Interface Conversion Adapter With Baffle 1. Connect the M.2 hard disk defined by KEY-B-M SATA on the motherboard to the SATA 22PIN interface. This adapter board only connects the signal from the M.2 hard disk to the SATA 22PIN connector, so the adapter card does not need a driver. 2. Support all SATA standard M2.SSD, do not support NVME M2.SSD, do not support PCI-E M2 SSD 3. This card is suitable for 4 different SSD hard disk lengths, suitable for different M2 (NGFF) SSD hard disk lengths such as 3cm, 4.2cm, 6cm, and 8cm. Using ceramic filter capacitors, high-power LDO voltage regulator control chip, stable performance The riser card only changes the interface form of the solid state drive, and does not change any performance of your hard drive. What are the parameters of your original hard drive, with the riser card, the performance of the output interface will not change. Product interface: M.2 NGFF SATA 22PIN Support system: WinXPVistaWin7Win8 32-bit64-bit MACLINUX Note: The product is only a riser card, not including a hard disk