描述
F450 PCB Frame Kit For Quadcopter
Wheelbase: 17.7in/450mm
Made by advanced engineering material,super strong & smooth
Kit(need you assemble yourself)
F4V3S flight controller Item Specifics:
Product Name: F4 Flight Controller Board
Material: Electronic component
Standard Board Size: about 36x36mm
Standard Size of Mount Hole: 30.5x30.5mm
Features:
-STM32 F405 MCU
-Dshot support
-Drag and Drop OSD configured via Betaflight Configurator
-Smartaudio v2 support Tune your PID's and configure the omnibus F C from your Transmitter
-MPU6000 6 axis SPI Gyro & Accelerometer
-SBUS/PPM AND Spketrum dsm-x Ports
-SD card blackbox
-Baro(BMP280)
-5V 3A SBEC
-On-board Video Filter(only can supply 5V to VTX and Camera)
-SmartAudio V2 via tx6 on J10
-43 pin ESC pin layout
-IR pins for lap timing transponder
Sensors and Components
3-axis Gupports several common RC inputs: 6 PWM channels, combined PPM, for spektrum/JR DSM2,
Supports several common RC inputs: 6 PWM channels, combined PPM, for spektrum/JR DSM2, DSMJ, for satellites, and Futaba S.Bus receivers.
Simultaneous support for multiple receivers.
ReceiverPort functions (configurable): 6 PWM input channels or combined PPM stream, 4 PWM output channels
MainPort functions (configurable): serial telemetry (default), GPS, S.Bus, for spektrum/JR satellites
FlexiPort (configurable): serial telemetry, GPS, for spektrum/JR satellites, or I2C peripherals (under development)
10 PWM outputs to servos or ESC's, or for camera stabilization
Camera stabilization: supports up to 3-axis camera mounts with stabilization and manual control from any of configured receivers.
Onboard USB connectivity for easy configuration.
USB and serial telemetry and configuration
Supported by powerful OpenPilot GCS
4 Mbit onboard memory
3C Quaternion based complementary filter running at 500Hz
XXD A2212 KV1000 Brushless Motor
Description :
Name: A 2212 A2212 1000KV Brushless Outrunner Motor W/ Mount
For: RC Aircraft / KKmulticopter 4-Axis/6-AXIS Quadcopter UFO
KV: 1000
Max Efficiency: 80%
Max Efficiency Current: 4-10A (>75%)
Current Capacity: 12A/60s
No Load Current @ 10V: 0.5A
No. Of Cells: 2-3 Li-Poly
Motor Dimensions: 27.5 x 30mm
Shaft Diameter: 3.17mm
Weight: 47g/set
Including: 1 set 2212 1000KV Brushless Outrunner Motor with Mounts *4
Name : A(200200)608 - 4 x Brushless Motor A2212/13 KV1000.
No load Current : 10 V : 0.5 A.
Maximum current: 12A/60s.
Apply to the ESC : 30A.
Apply to the Lipo : 2 - 3S.
Apply to the NiCD / NiMH : 6 - 9S.
Apply to the Propeller : 8x4.5" 9x4.5" 10x4.5" 10x4.7".
Apply to the three Propeller : 7x4.5" 8x4.5" 9x4.5".
Does not contain Dimension : 28.0mm x 26.8mm .
Does not contain Dimension : 28.0mm x 40.0mm .
Shaft diameter : 3.175mm.
-
Fruugo ID:
433317887-909608884
-
EAN:
6903379384044
产品安全信息
请参阅下面列出的特定于该产品的产品安全信息
以下信息由销售该产品的独立第三方零售商提供。
产品安全标签
安全警告:
Please note that the product is safe under normal use conditions. However, improper use may lead to hazards such as damage, injury or other safety risks. Please read and follow the instructions carefully.This product complies with EU safety standards. However, for your safety, if any abnormality (such as strange smell, overheating, loose parts, etc.) is found during use, please stop using it immediately.In accordance with the EU General Product Safety Regulation, we remind you that this product is only suitable for [specific applicable people / scenarios]. Use in non - specified people / scenarios may bring potential safety hazards.
