1. Load the battery use and check whether the wires in the container have contact with the metal mesh, which is the key inspection step 2. Put in the grass . It is suggested that the length of the grass is more than 5mm, which is more effective.Then tighten the lid. 3. In the model and on the ground table, white is drawn and applied evenly, to sprinkling grass 4. Press the surface of the with the negative electrode electrical connector, as as possible, and then use the grass planter to spraying the grass 2-3cm from the . 5. After the grass is finished, pour out the extra grass or use a model vacuum cleaner to suck it up. the haystack with small scissors and a toothpick until it grows evenly. Material:Metal + Plastic colour:Black Package Contents: 1 x flocking machine (2 x 1.5V batteries not included) 1 x small diameter grille 1 x diameter grille 1 bag x grass 1 x brush 1 x Planting Template Tool Only the above package content, other are not included. Note: Light and different displays may cause the color of the item in the a little different from the real thing. The measurement allowed error is +/- 1-3cm.