- Effortlessly maintain your fluoride filter with easy cleaning steps. Simply wash the exterior of each filter element using water and mild detergent, then rinse thoroughly. - Remove the blue caps from both ends of each filter element for optimal performance. - To ensure a thorough clean, flip the fluoride filter and reverse the water flow. Repeat the flushing process until the water runs clear from both directions. - For effective installation, use the rubber suction button on one end of the fluoride filter. Align the filter hole with the rubber washer hole, then press the suction button against the sink tap to create a secure seal. Apply thumb pressure on the tap for an even better fit. - While maintaining pressure on the vent button against the tap, gradually turn on the cold water. This fills the filter cavity and allows water to flow out the opposite end. Continue this for at least 30 seconds or until the water is clear, ensuring optimal performance. - Compatibility: Designed for standard sink taps, making it easy to integrate into your kitchen or bathroom setup. - Material: Constructed for durability and efficiency, ensuring long-lasting use and reliable filtration performance. - Perfect for households looking to reduce fluoride exposure in drinking water, enhancing your family's health and well-being. - Ideal for use in homes with children or individuals concerned about fluoride levels, providing peace of mind with every sip.