Features: 1. The USB2ANY interface adapter allows a computer to control the Electronic Evaluation Module () using a USB connection via a small dongle. 2. Normally, some evaluation modules cannot be directly connected to a computer due to their dedicated interfaces. 3. USB2ANY is a USB2.0 device that supports many different interfaces, such as 13 general- input/outputs (GPIO), I2C (with programmable 1.5k pull-up resistors), SPI, UART, four 12-bit ADCs, and two 8-bit DAC. 4. 3.3V and 5.0VDC regulated power supplies can be pulled to the target device with a maximum current of 300mA. Built-in current sensing and limiting circuitry prevents and USB2ANY from overcurrent and short circuit. 5. Compatible with dozens of TI host computer software such as TI's SigCon Architect, TICS Pro, USB2ANY Explorer, PGA460-Q1 (more software can be confirmed by consulting customer service) Description: 1. Model: USB2ANY 2. Type: Interface Adapter 3.Material: Plastic color: black Package Contents: 1 x USB2ANY Adapter 1 x USB-A To USB-B Cable 1 x -10P Double-Ended Cable 1 x -30P Double-Ended Cable Note: Different Batches May Have Differences In Product Appearance, Color, And Printed Characters, Which Will Not Affect The Use Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.