Feature: 1. Through the built‑in PLC or control terminal to achieve up to 16‑speed operation, linear or S‑curve acceleration and deceleration mode, the range is 0.0‑3600.0s. 2. In case of instantaneous power failure, the voltage is compensated by the load feedback energy to keep the inverter running in a short time. 3. When the VF operating load changes, the output current is automatically limited to prevent over‑current tripping and realize the "shovel" characteristics. 4. With motor short circuit detection, input and output phase loss protection, overcurrent, overvoltage protection, undervoltage, protection, overload protection, etc. 5. The parameters can be quickly copied through the LED operation panel, and part or all of the keys can be locked to prevent misoperation. 6. Digital setting, analog voltage setting, analog current setting, pulse setting, communication setting, can be switched in many ways. Specification: Item Type: Frequency Converter Material: ABS Control Mode: Vector control without PG, vector control without PG 1, V/F control, torsion control, vector control with PG Rated Frequency: 50/60Hz, fluctuation range ±5% Model AC Input Voltage(V) Power (KW) Rated Input Current (A) Rated Output Current (A) Adapted Motor (KW) C500-004G/5R5P-4TB 3-Phase AC380V-480V 4.0/5.5 10/15 9/13 4.0/5.5 C500-5R5G/7R5P-4TB 5.5/7.515/2013/17 5.5/7.5 C500-7R5G/011P-4TB 7.5/11 20/26 17/25 7.5/11.0 . Package List: 1 x Frequency Converter1 x User Manual Note: 1. The ambient temperature is ‑5℃‑40℃, avoid high temperature and humidity, and the humidity is less than 90% (no condensation).2. Prevent electromagnetic interference and stay away from the source of interference.3. Prevent the intrusion of water droplets, steam, dust, cotton wool, and fine metal powder, and prevent the intrusion of oil, salt, and corrosive gases.4. It is forbidden to install in the environment containing flammable and explosive gas, liquid and solid.5. Do not install air switches, contactors and related capacitors or varistors on the output side, otherwise it will cause the inverter to malfunction.Trip protection or damaged components.6. The inverter must use an independent power source, and avoid sharing the same power source with electric welders, otherwise it will cause protection or damage to the inverter.7. In order to facilitate cooling and maintenance, the inverter must be installed vertically with enough space around to ensure smooth air circulation.8. Non‑combustible materials such as iron plates should be used on the installation wall to avoid damage to the inverter caused by vibration.9. When multiple inverters are installed in the same cabinet, when they are installed up and down, pay attention to the spacing and add a baffle in the middle.