Lightweight plastic material, easy to carry and replace Simple and easy to install Stylish design enhances the appearance of your vehicle Product Name: Bumper Sensor Cover Condition: New Part Number: 156126159, 156114929 Fitment: FOR STELVIO 2016– Installation: Adhesive tape (stick or paste) Precautions: (1) In cold environments (below 18°C), adhesive performance may decrease. Use a heating device such as a hair dryer to warm the vehicle surface and inner rubber before installation. (2) Press the double-sided tape firmly during application. Once removed, adhesive strength may be reduced. Confirm correct positioning before final placement. (3) Adhesive strength improves after 24 hours. Avoid car washing for 24 hours after installation. If washing is necessary, wait at least 1 hour and avoid soaking the installed area. Do not use automatic or high-pressure car wash systems on the day of installation. (4) Ensure the mounting surface is clean, dry, and free of dust, sand, or debris. Use of an adhesion promoter is optional but not required. (5) Avoid highway driving for 3 days after installation Material: Plastic Color: Black Package Contents: 1 x Bumper Sensor Cover Note: Other accessories shown in images are not included Note: Lighting and monitor settings may cause slight color variations between the image and the actual item. Measurement may vary by +/- 1-3 cm.